Touch 'n Seal 2 component use guidelines
Company
Products Technical Info & FAQs Industry Links Reps Only

Jump To:

New Products
Troubleshooting
Use Guidelines
MSDS
Foam Yields
Refillable Foam Systems

 

 

Foam Kit 15 Use Guidelines

ALWAYS review and follow the directions provided in your foam kit.  The below instructions are a general overview, meant to accompany the reference photos.  ENSURE you follow all safety precautions including wearing protective eyewear and gloves.

Foam Kit 15 Assembly Instructions: (Click pictures to enlarge)

  • Tear open the back of the box (Figure 1)

  • Without forcing, remove hoses and applicator to full length (Figure 2)

  • Ensure gun safety is ON (roller is locked toward end of applicator)

  • Pull yellow tab to remove black plastic valve lock.  Discard. (Figure 3)

  • Activate valves by pulling black strap up and insert strap into slit (marked in yellow) on back of box.  Hoses will partially fill with chemicals.

  • Hold unit UPSIDE DOWN, move roller to “ON” position (towards hoses) and dispense foam.  Adjust roller to increase/decrease flow.

  • If dispensing is stopped for more than 30 seconds, replace nozzle with the extra provided.

  • Foam can be trimmed, painted, sanded or plastered after curing completely.

 

2 component foam kit use guideines
Figure 1

2 component foam kit use guideines
Figure 2

2 component foam kit use guideines
Figure 3